A R C H I B A L D
A R C H I B A L D
A R C H I B A L D
A R C H I B A L D
ASSE M BLY AND M O UNTING INSTR UCTI O NS
U E - 8 7 0 5
STEP 5
STEP 5
STEP 5
STEP 5
USING THE WIRE NUTS PROVIDED, MAKE ELECTRICAL
CONNECTIONS BY FOLLOWING THE ELECTRICAL CONFIGURATION
TABLE BELOW. ENSURE THAT ALL ELECTRICAL CONNECTIONS
ARE WRAPPED WITH UL-LISTED ELECTRICAL TAPE.
STEP 6
STEP 6
STEP 6
STEP 6
ATTACH THE MIRRORED BACKPLATE TO THE WALL BY SLIPPING
THE FIXTURE OVER THE MOUNTING PLATE AND TIGHTENING THE
TWO SET SCREWS AT THE BOTTOM OF THE BACKPLATE. BE
CAREFUL TO AVOID SCRATCHING THE FINISH ON THE FIXTURE.
STEP 7
STEP 7
STEP 7
STEP 7
INSTALL THE LIGHT BULB IN THE FIXTURE SOCKET AND RESTORE
POWER TO THE FIXTURE. CONFIRM PROPER OPERATION OF THE
LIGHT FIXTURE.
STEP 8
STEP 8
STEP 8
STEP 8
ATTACH THE FIXTURE TO THE MIRRORED BACKPLATE BY
SLIPPING THE FIXTURE OVER THE BACKPLATE AND RE-ATTACH
THE FOUR PAN HEAD SCREWS AT THE BOTTOM & TOP OF THE
FIXTURE. BE CAREFUL TO AVOID SCRATCHING THE FINISH ON
THE FIXTURE.
E L E C T R I C A L C O N F I G U R A T I O N T A B L E
E L E C T R I C A L C O N F I G U R A T I O N T A B L E
E L E C T R I C A L C O N F I G U R A T I O N T A B L E
E L E C T R I C A L C O N F I G U R A T I O N T A B L E
F R O M H O M E
F R O M H O M E
F R O M H O M E
F R O M H O M E
F R O M L U M I N A I R E
F R O M L U M I N A I R E
F R O M L U M I N A I R E
F R O M L U M I N A I R E
GENERAL NOTE:
GENERAL NOTE:
GENERAL NOTE:
GENERAL NOTE: USE UL LISTED WIRE NUTS FOR THE
WIRING CONNECTIONS IN THIS LUMINAIRE. WRAP WIRE
NUT CONNECTIONS WITH UL LISTED ELECTRICAL TAPE.
FOR QUESTIONS, PLEASE CONTACT CLIENT SERVICES
AT: 843.723.8140 OR [email protected]
CONNECT BLACK OR RED (HOT)
HOUSE SUPPLY CIRCUIT WIRE
TO:
LUMINAIRE ROUND/BLACK WIRE
(HOT)
CONNECT WHITE (NEUTRAL)
HOUSE SUPPLY CIRCUIT WIRE
TO:
LUMINAIRE RIBBED/WHITE WIRE
(NEUTRAL)
CONNECT GREEN INSULATED OR BARE COPPER (GROUND -)
HOUSE SUPPLY CIRCUIT WIRE AND LUMINAIRE BARE STRANDED
WIRE (GROUND -) TO GREEN GROUND SCREW ON MOUNTING
PLATE
