A R C H I B A L D
A R C H I B A L D
A R C H I B A L D
A R C H I B A L D
ASSE M BLY AND M O UNTING INSTR UCTI O NS
U E - 8 7 0 5
M O U N T I N G I N S T R U C T I O N S
M O U N T I N G I N S T R U C T I O N S
M O U N T I N G I N S T R U C T I O N S
M O U N T I N G I N S T R U C T I O N S
STEP 1
STEP 1
STEP 1
STEP 1
SHUT OFF THE MAIN ELECTRICAL SUPPLY TO THE JUNCTION
BOX FROM THE FUSE BOX/CIRCUIT BREAKER. TURNING
POWER OFF AT THE SWITCH IS NOT SUFFICIENT.
STEP 2
STEP 2
STEP 2
STEP 2
LOOSEN THE FOUR PAN HEAD SCREWS AT THE TOP & BOTTOM
OF THE FIXTURE FRAME AND REMOVE THE MIRRORED
BACKPLATE FROM THE BACK OF THE FIXTURE. PLACE THE
FIXTURE ASIDE.
STEP 3
STEP 3
STEP 3
STEP 3
USING THE PROVIDED HEX WRENCH, LOOSEN THE TWO SET
SCREWS AT THE BOTTOM OF THE MIRRORED BACKPLATE
ENOUGH TO REMOVE THE MOUNTING PLATE. PLACE THE
MIRRORED BACKPLATE ASIDE.
STEP 4
STEP 4
STEP 4
STEP 4
PULL HOUSE SUPPLY CIRCUIT WIRING THROUGH THE WIRE-WAY
OF THE MOUNTING PLATE. ATTACH THE MOUNTING PLATE TO
THE JUNCTION BOX USING THE JUNCTION BOX SCREWS AND/OR
THE WOOD SCREWS AND EXPANSION ANCHORS PROVIDED. IT IS
IMPORTANT TO CHECK LEVEL ON THE MOUNTING PLATE.
