urban drivestyle UNI MK Classic, User Manual

Page: 16 / 60

16
Handlebar Adjustment
The handlebars of your UNI MK Classic/Swing are folded inwards for transport. To adjust them, sit on the bike in a comfortable
position and HORIZONTALLY unfold the handlebars until you find your most comfortable setting. Fasten ALL 6 SCREWS
TIGHTLY to fix the position of your handlebars. First tighten the 4 screws on the lower fork with an allen key, and ONLY when
these are tightened to the recommended torque, proceed to tightening the display holder bracket screws. The fastening bolts
need to be TIGHTLY fixed to avoid movement of your handlebars under force (braking, pulling). Use recommended tightening
torque values stated in chapter 15.
The handlebars are fixed to a height that fits 99 % of users. Mark insertion is taped on the handlebars. You can LOWER the
handlebars if necessary, but please NOTE that this step can not be reverted without visible scratches to the steering bar tubes!
Never adjust the minimum mark
of handle stem above the top
of the fork tube