ONE MADISON LED MIRROR — INSTALLATION INSTRUCTIONS 5 OF 5
INSTALLATION INSTRUCTIONS
W W W . U R B A N A R C H A E O L O G Y. C O M
Power Connections
1. Drag the cable from the mirror to the driver.
2. Make sure the power coming from the main electrical box is turned off.
3. Inside a junction box, connect the wires from the cable coming from the mirror to the output wires from the LED driver. Connect red wire to red
wire and black wire to black wire. Once the connection is complete, close the junction box.
4. Inside another junction box, connect the input wires on the LED driver to the line voltage wires coming from main power source. Once
connection is complete, close the junction box.
The LED lighting inside the mirror will be switched on / off at a wall switch provided by others.
Grounding Instructions
This product must be connected to a grounded metal, permanent wiring system, or an equipment-grounding conductor must be run with the circuit
conductors and connected to the equipment-grounding terminal or lead on the product.
User-maintenance Instructions
When cleaning the mirror or frame, do not use any abrasive products. Since the mirror frame is suspended from the ceiling, hold the frame in one
hand to prevent movement while wiping the mirror.
Use Nevr-Dull or equal metal cleaner to clean the frame, following the manufacturer’s instructions.
