2of2
HOW TO REPLACE GLASS PANELS
Allen Screw
Glass Panel
Cage
A.
Fixture Hood. Separate Quick
Connector and then remove Cage with Glass Panels from the
fixture.
B. Unscrew Screws from the Cage and remove LED Module and Heat
Unlock Allen Screws on the
Figure 6
Glass Holder
Fixture Hood
Sink, Glass Holders.
Replace Glass Panels from
the Cage and then re-install
Glass Holders, LED Module
and Heat Sink . Secure with
removed Screws.
C. Connect Quick Connectors.
Attach Cage with Glass
Panels back onto the Fixture
Hood and secure with Allen
Screws.
LED Module
and Heat Sink
Quick
Connector
Screw
HOW TO REPLACE LED MODULE
A.
Fixture Hood. Separate Quick
Connector and then remove Cage with Glass Panels from the
fixture.
B. Unscrew Screws from the Cage and remove LED Module and Heat
Sink.
C. Unscrew Lock Screws on the LED Module. Replace the LED Module
Unlock Allen Screws on the
S
KU: UQL1244
PART NUMBER
1
NO. PART NUMBER
UQL1244
PA
REPLACEMENT PART
GLASS PANEL
QTY.
4
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/4
"
Fixture can only be
mounted in the
direction indicated
with the replacement.
Pass Lock Screws
through the replacement
LED Module, the Heat
Sinks as shown and
thread Hex Nuts onto
Lock Screws to secure
them together. Hand
tighten until snug.
D. Pass the Quick
Connector from the LED
Module through the hole
on the Heat Sink.
E. Re-install LED Module
and Heat Sink onto the
top edge of the Cage.
Secure with Screws.
Connect Quick
Connectors. Attach
Cage with Glass Panels
back onto the Fixture
Hood and secure with
Allen Screws.
17”
8”
6.5”
12”
11”
4.5”
Allen Screw
Fixture Hood
Screw
LED Module
Quick
Connector
Cage with
Glass Panels
Lock Screw
Heat Sink
Figure 7
Hex
Nut
Upper
Heat Sink
1
www.urbanambiance.com
