6of6
STEP 9
Apply Silicone Sealer to Backplate
-
A. To prevent moisture from entering the wire
compartment, apply a small amount of silicone sealer
(not included) to the mounting screws (B). Wipe off
excess caulk.
B. Make sure exterior wall surface and fixture backplate
are free of dirt before applying caulk. Using exterior
grade caulk, start on one side of fixture backplate and
follow contour, where the fixture backplate meets the
exterior wall surface upward. Proceed to caulk over top
of backplate and down other side. Do not caulk bottom
of fixture backplate to ensure proper moisture
drainage.
Your fixture is now assembled and ready to use. Enjoy!
Figure 10
Mounting
Screw
Exterior
Grade Caulk
Outdoor
Fixture
Backplate
Exterior Wall Surface
Installation Instructions:
UQL
1
1
73
www.urbanambiance.com
