Adaptable
Shower Commode
(M83647)
Page 2 of 12
Introduction – A
dapatable
Shower Commode Chair
These instructions aid the user and/or carer about the safe and efficient
use of this product, including assembly, cleaning and maintenance, and
operation of the product.
Ensure that you fully read these instructions before using this product.
The product can be used as
an
aid for showering or toileting. It comes
with a potty and lid or can be wheeled over most conventional and
disabled toilets. It is suitable for a single occupant up to 160kg (25 stone)
for the standard version (M83647), 260kg (39 stone) for the Heavy Duty
version (N36354) and 300kg (47 stone) for the Bariatric version. The
device is available as an attendant propelled version with 4-braked castors,
or a user propelled version with 2-braked castors and 24” rear wheels. It is
constructed from aluminium and polyurethane (PU) with stainless steel
fasteners so is suitable for use in a bathroom environment.
Personal Safety
Read these instructions carefully before use.
Check all components are secured before use.
Only use on level ground.
When stationary apply the brakes on the wheels. Ensure the brakes
are released before the chair is moved again.
Always ensure that the device is stationary and braked applied
when transferring to and from the device. Swing away the leg rests
before getting in or out of the device. The user should always
remove their feet from the leg rests before swinging the leg rests
away.
Do not lean out of the device.
Ensure that all castors and wheels are set to the same height and
that there is not a significant tilt on the seat.
Be careful of pinch points when rising from or lowering on to the
seat, or when you are removing the potty.
When issuing or reissuing, a risk assessment of the user’s stability
for the device may be required. The chair should also be checked
and cleaned as described in the care and maintenance section.