URAL Motorcycles Retro Solo 2003, Owner'S Manual

Page: 16 / 80

16
CONTROL CABLE ADJUSTMENT
The control cables are adjusted by screw adjustments at the cable ends.
With the control levers released:
•
for the clutch a play at the clutch lever end should be equal to 5 - 8 mm/0.2 - 0.3 in.
•
for the carburetors - carburetor throttle cables synchronized
With the control levers (handles) fully depressed:
•
for the clutch — complete disengagement of the engine from the transmission; noiseless shifting
of gears means good adjustment of the clutch cable.
•
for the carburetors — lift of throttles to the maximum and equal height
CONTROL CABLE MAINTENANCE
The daily preventative maintenance involves checking the functioning, condition and fastening of
the tie rods, cables and braking action. Refer to the Service Coupons for lubrication schedule.
As per the service coupons, lubricate the throttle control twist grip, the lever pins and ends of
cables used in the clutch and the throttles.
SPEEDOMETER MAINTENANCE
After every 10,000 km, remove the speedometer from the motorcycle and add five or six drops of
oil into the speedometer where the cable inserts into the speedometer. This will lubricate the speed-
ometer internally.
To lubricate the speedometer cable, remove the cable from the speedometer and pull straight. Use
speedometer lubricating oil or light machine oil.