UPVEL UP-103I PoE injector
QUICK INSTALLATION GUIDE
Getting started
1
. Fix the
PoE
injector on some flat surface if necessary.
2. Connect the injector to your local network using the LAN port.
3. Connect your PoE device (or non
-
PoE device combined with PoE splitter) to
PoE
port
.
4.
Connect
the power cable
to
the
injector
and plug it into a socket.
5. Make sure the connection is established. The Power LED should be active when the connected device is on. The
Active
LED
should be active when data is being transmitted.
Package contents
•
PoE
injector
•
Power cable
•
Quick Installation Guide
Specifications
Standards
IEEE 802.3 10Base
-
T, IEEE 802.3u 100Base
-
TX ,
IEEE 802.3at
Data Rate
10/100 Mbps
Input Power
100
V
~240
V
AC
, 0.75
A
47
~6
3
Hz
Оutput Voltage
53
±
2
V
Оutput Current
from 600 mA
Output Power
31.8 W
PoE Mode
B (+ 4, 5;
-
7, 8)
Weight
6.6oz (187g)
Dimensions
5.4x2.5x1.3
in (
137x
62
x32
mm)
Environment
Operating Temperature:
-
10 ~
4
0
℃
(14 ~ 104 °F)
Storage Temperature:
-
10
~ 60
℃
(14 ~ 140 °F)
Storage humidity: 5 ~
95
%
non-
condensing
Safety Approvals
CE
,
FCC
,
EAC
For any unforeseen installation issues or questions about the
UP-103I
Gigabit Po
E
Injector
,
please contact our Technical Support:
UPVEL
Toll Free Support Hotline:
Irvindale, CA USA
•
USA/Canada:
855-IT-UPVEL (855 488-7835)
UPVEL is registered Trademark
(M
-
F 10AM
-
7PM PST excl. public holidays)
Designed in USA / Made in China
