■
Limitation of Warranty
Please note that UPRtek is not responsible for
providing repairs under warranty if the product
defect is caused by any of the following factors：
1.
2.
3.
4.
Disclaimer
■
■
question cannot be found by our technicians, you
are responsible for paying a testing fee plus
shipping fee for NDF (No-Defect Found) products.
Claims for loss or damage during shipment must
be made to the courier by the customer. For your
protection, we strongly recommend that you fully
insure your return shipment for damages. Please
use a courier that is able to provide you with proof
of delivery.
Damage caused by natural calamity or any
inappropriate usage.
Product has been repaired or taken apart by
unauthorized technicians.
The warranty label is altered, damaged or missing.
Product serial number does not conform to our
original system or the label has been damaged.
UPRtek shall in no event be liable for any defect,
damage or data loss that has occurred during the
delivery of in-warranty products. Prior to claiming
warranty service, UPRtek recommends that you
make a backup of your data and remove your data
from in-warranty products.
Under the maximum allowable range of applicable
laws and regulations, any business loss, expected
cost loss, data disappearance, or any other indirect,
accidental, or derived loss or damages due to the
utilization of or related to the company product,
shall not be the responsibility of UPRtek for any
compensation.
Customers Eligible for Warranty Service
UPRtek warranty policy applies to all customers
who
purchased from either UPRtek or through authorized
agents of UPRtek.
Duration of Warranty
MF250N HOST：
The MF250N FLICKER METER series all come with a
2-year product warranty.
Authorized Distributor / Dealer Services
■
■
■
Additional Remarks
Product parts and components are not always
manufactured by UPRtek. On occasion, these 3rd
party components may need to be replaced but are
already discontinued by the supplier. In this case,
UPRtek assures customers that it will fulfill it
’
s repair
andreplacement responsibilities by using substitute
parts or components of equal level and quality.
Delivery Methods
Consumers can choose either of the two methods
Product-based functional testing
- Performed by
distributors and dealers to determine whether the
product needs to be returned to the factory for
further calibration services or technical repairs (All
UPRtek authorized distributors/dealers have a
right to perform “Product-based functional
testing” for a reasonable charge).
RMA product delivery to and from factory
-
Distributors/dealers can assist customers in
sending/receiving RMA products to/from the
UPRtek factory.
Authorized distributors/dealers are listed on our
website : www.uprtek.com
