■
Engine Oil
Figure 7.6 - Engine Oil Level
Keep the oil level be tween the marks on the dip -
stick
(see Fig ure 7.6).
The dis tance be tween the top and bot tom dip stick
marks cor re sponds to about 1 qt. (one li ter). Add
oil, if needed at the cap
(see Fig ure 7.6), there is
an al ter na tive filler cap on top of the en gine.
See the Spec i fi ca tions chap ter for the cor rect en -
gine oil grade and weight.
■
Engine Coolant
Figure 7.7 - Engine Coolant Level
The Kubota en gine is liq uid cooled. The cool ant
should be be tween the FULL level
and the LOW
level
(see Fig ure 7.7).
The cool ant is half wa ter and half eth yl ene gly col.
To add cool ant:
Turn the engine OFF at the ground control box box
KEY SWITCH. Remove the cap
(see Figure 7.7)
from the coolant reservoir. Add coolant and replace
cap.
■
Radiator Cap
Figure 7.8 - Radiator Cap
Vi su ally check to see that the cap is in place and
tight.
■
Swinging Gate
Figure 7.9 - Swinging Gate
In spect the gate to see that it swings freely, latches
se curely, and is not de formed in any way.
■
Wiring Harnesses and Connectors
In spect all the wir ing har nesses, on the ma chine,
for loose con nec tions, bro ken wires, and frayed in -
su la tion.
Figure 7.10 - Wiring Harnesses and
Connectors
SR3370 & SR2770 – 13184A
Rev A
page 7 - 3
7. Daily Inspection and Maintenance
