Upright ULII-25, Service & Parts Manual

Page: 9 / 113

UL-25/32/40/48 Portable Personnel Lifts 2-1
Machine Preparation
Section
7. For DC machines, hang the battery box on the pegs
provided on the back of the mast and connect the
battery quick connector. If necessary plug the Battery
Charger cord into a grounded AC outlet of proper
voltage and frequency to charge the battery.
2.2 Preparation For Shipment
The following instructions are for shipping the machine
by a freight carrier.
For instructions on transporting UL Lifts short distances
by pick-up or small flat bed truck see Section 3.5.
1. Fully lower the Platform.
2. Disconnect the battery quick connector and remove
the battery box from the rear of the mast assembly
(Figure 2-3).
3. Band the Platform Assembly to the Chassis.
4. Place a lifting strap through the lifting lugs located
on the cage support assembly and to a suitable
lifting device (Figure 2-1). Lower the machine with
the lifting device to the horizontal position.
5. Using a forklift, raise the machine up far enough to
place the base of the crate under the machine.
Lower the machine onto the base of the crate.
6. Band the machine and the battery box to the base
of the crate.
7. Assemble the rest of the crate around the machine
and band together.
Read, understand and follow all safety rules and
operating instructions before attempting to operate
the machine.
2.1 Preparation for Use
STAND CLEAR when cutting the metal
banding to avoid being cut when the
banding snaps back.
1. Remove the metal banding securing the battery box
(DC machines only) and the machine to the crate.
2. Remove the battery box from the crate (DC ma-
chines only).
3. Disassemble the crate.
4. Remove any other banding or straps from the
machine.
5. Using a forklift, raise the machine up far enough to
remove the base of the crate (Figure 2-1). Lower the
machine.
6. Place a lifting strap through the lifting lugs on the
cage support assembly and to a suitable lifting
device. With the lifting device, raise the machine to
its vertical position.
2.1
Figure 2-1: Lifting UL Lifts Figure 2-2: Battery Box
Charger
Battery Quick
Connector
Forklift
Lifting
Lugs