Lubrication
Section 2 - Service and Repair
Page 2-6
104045-021 - AB62 Work Platform - European Model
2-3 L
UBRICATION
Refer to the Operator Manual for the lubrication intervals and Figure 2-3 and Figure 2-4 for location of
items that require lubrication service.
T
U R R E T
B
E A R I N G
The grease fitting for the turret bearing is located at the front of the turret assembly.
Figure 2-3:
Turret Bearing Grease Fitting
1. Wipe the fitting before and after greasing.
2. Using multipurpose grease in a grease gun, pump
the grease into the fitting until grease just begins to
appear at the edges of the pivot.
3. Wipe off any excess grease.
L
U B R I C A T I N G
T
U R R E T
G
E A R S
Figure 2-4:
Turret Gear
Using a brush, apply open gear grease to the turret gears.
Grease Fitting
Apply Open Gear Lube
