Page 6
Operator Manual
104044-021 AB62 Work Platform - European Model
Pre-Operation Safety Inspection
P
RE
-O
PERATION
S
AFETY
I
NSPECTION
V
I S U A L
I
N S P E C T I O N
NOTE:
Carefully read, understand and follow all safety rules, labels, and operating instructions; then perform the
following steps each day before use.
Perform a complete visual inspection of the entire unit prior to operating. Check the following areas for dis-
crepancies:
1. Open the covers and check hydraulic components and hoses for damage or leaks.
2. Check electrical components and wiring for damage or loose connections.
3. Inspect the chassis, axles, hubs, and steering linkage for damage, deformation, buckled paint, loose or
missing hardware, and cracked welds.
4. Air-filled tires: check for damage, punctures, and inflation; tire pressure must be 5.5 bar (80 psi).
5. Check all hoses and cables for wear.
6. Inspect the elevating assembly for damage, deformation, buckled paint, loose or missing hardware, and
cracked welds.
7. Inspect the platform and guardrails for damage, deformation, buckled paint, loose or missing hardware,
and cracked welds. Ensure that the gate operates freely and latches securely.
8. Check the hydraulic fluid level with the platform fully lowered.
9. Check the battery fluid level.
10. Check the fuel level; add fuel if necessary.
11. Ensure that the radiator is cold; check coolant level. Add if necessary.
W A R N I N G
!
!
NEVER remove the cap from a hot radiator. Hot coolant can cause severe burns.
Figure 3:
Locking Pin
12. Retract the locking pins.
• The locking pins prevent turret rotation during transport and loading
or unloading from a truck or trailer. There are two pins; one on each
side, at the base of the turret, at the front of the machine.
a. Lift the locking pin with the pin stop rod.
b. insert the snap pin into the bottom hole.
NOTE:
Locking pins must be engaged for loading or unloading the machine onto
a truck or trailer, and during transport.
a
b
