Uponor Smatrix Wave PLUS U@home R-167 – User interfaces of U@home l 7
User interfaces of U@home;
local and remote
To use U@home, simply download the U@home iOS or
Android app for your smartphone or tablet. Further details
are available in the section “Smartphone/tablet apps”. If you
wish to use your PC or smart TV, or if your phone/tablet does
not support the iOS or Android operating systems, U@home
can be accessed by using web access via your web browser.
There are two service levels in U@home:
Local Access
Access to your UFH/C system at home. You have access to
U@home when you are connected to your home LAN. It is
not necessary to register in the U@home website. The only
requirement is to have the U@home module installed in your
home.
Remote Access
Access to U@home wherever there is internet connectivity.
The requirements for U@home remote access are as follows:
• The U@home module must be correctly installed in your
home.
• An internet connection is needed in the U@home module
as well as in the device from which you would like to
access this service. Please check the connection require-
ments in the FAQ section.
• To activate remote access, you need to create your
U@home user account first, see section “Create a user
account”. Once your user account has been activated, the
remote access service can be used.
If, after logging in to your account, your installation appears
as “Remote control disabled”, just click on “Enable
communication” to start the remote access service.