Setting the Display
The 511s and 512 controllers allow the user to change the display to show
either the current time or any of the settings from the View menu. Follow
the steps below to select which setting is displayed.
1. Press the Menu button to select the Time if you want the time to display.
2. Press the Menu button again to select
the View menu.
3. Once in the View menu, use the Item button
to select the desired item to display.
Setting the Temperature (501 and 501s)
To set the desired temperature, simply press the up or down arrow
buttons to adjust the temperature.
Note:
The Adjust menu automatically appears.
Setting the Temperature (511 and 512)
Follow the steps below to set the desired air and slab or floor temperatures.
Note:
Slab or floor temperatures are only available when a slab or floor
sensor is used.
1. Press and release the Menu button until the Adjust menu displays.
2. Press and release the Item button until the desired event displays
(Wake, UnOcc, Occ and Sleep).
3. Use the up or down arrow buttons to set the
desired temperature. Record the temperature
in the schedule tables found on
pages 8
and
9
for future reference.
Repeat steps 2 and 3 for each additional event.
Setting the Time and Day (511s and 512 Only)
Follow the steps below to set the time and day.
1. Press and release the Menu button until the Time menu displays.
2. Press the Item button to change the minute setting. While the
minute field is flashing, use the up or down arrow buttons to set the
proper minutes.
3. Press and release the Item button again to change the hour setting.
While the hour field is flashing, use the arrow or down arrow buttons
to set the proper hour.
3
Display Symbols
Warning
Displays when an error exists
Access Level (501s, 511s and 512 Only)
Displays when in the User Access Level
Early Start (511s and 512 Only)
Displays when in Early Start
Heat 1
Displays when the Heat 1 contact is on
Heat 2 (512 Only)
Displays when the Heat 2 contact is on
Cool 1 (512 Only)
Displays when the Cool 1 contact is on
Viewing the Current Temperature
(501s, 511s and 512 Only)
The View menu displays the current temperature sensed by the controller
and its auxiliary sensor. To view the various temperatures, begin by
selecting the View menu using the Menu button. Then use the Item
button to view the available temperatures.
Room
This is the current air temperature of the room that is being controlled.
At least one air sensor must be active for this temperature to be displayed.
Outdoor
This is the current outdoor air temperature. This is only available if the
auxiliary sensor is set to sense the outdoor air temperature.
Slab
This is the current slab or floor temperature.
This is only available if the auxiliary sensor is
set to sense the slab or floor temperature.
2
SetPoint 500 Series Controllers User Manual
Summary of Contents for SETPOINT 500 SERIES
Page 8: ...Notes 10...
