important:
rotating the tool
1
⁄
8
turn expands the tubing smoothly
and evenly. reposition the head after each expansion to prevent
potential leak paths in the tubing. otherwise, the segments on
the tool head may cause deep grooves in the tubing, resulting in
potential leak paths. See
Figure 4-4
.
note:
it is not necessary to rotate
the tool in only one direction.
alternating the turning direction will
ease expansion in confined spaces.
See
Figure 4-5
and
Figure 4-6
for enlarged views inside expanded
tubing.
4. repeat the expansion
process until the tubing and
ring are snug against the
shoulder on the expander head.
the recommended number of
expansions for the 2" h head
is five.
note:
only use the 2" h-series
expander head on the ProPeX
201 corded expander tool.
10
www.uponor-usa.com
Figure 4-6:
expansion With Proper rotation
Figure 4-7:
repeat expansions until
completed
Figure 4-5:
expansion Without Proper
rotation
Figure 4-4:
reposition head after each
expansion
Summary of Contents for ProPEX 201
