UPM HTM621, Manual

Page: 19 / 30

This thermostat can copy program period settings from one day to another using the
COPY function. All four period settings (P1, P2, P3,P4) will be copied. This is faster than
programming each day one at a time.
I
f you are not already in program mode, press PROG to enter program setting mode.
Press DAY to select the weekday you wish to COPY FROM.
P
ress COPY. The COPY symbol will be displayed, and the next weekday will flash,
indicating the weekday being COPIED TO.
Press DAY to select the day you wish the programs COPIED TO.
Press COPY again to copy all four program settings from the first day to the flashing day.
The COPY symbol will disappear to indicate the COPY function is complete.
Note: To copy the program to another day, press copy again, and repeat.
For example: If you press COPY 12 times consecutively, the selected program
will be copied to the entire week.
17
2
1
3
4
Copy Program Function
HIGH-LIMIT FUNCTION
The maximum programmable temperature will be the high-limit setting if it has been selected.
If it is set after programming, any higher temperatures will be reduced to the high-limit.