UPM HTM621, Manual

Page: 18 / 30

First select the day you wish to program, then
select the start times and temperature settings for
all four program periods. Scroll through the daily
Program Periods in this order: P1, P2, P3, P4.
You may select any weekday to begin programming:
Press PROG to enter program mode.
Press DAY to change weekday being programmed. (Period 1 (P1) will appear.)
Press UP or DOWN to set the temperature for P1.
Press AHEAD or BACK to set the start time for P1.
Press PROG again to adjust the next Program Periods (P2, P3, P4) and to exit program mode
Repeat the above steps above until all four programs are adjusted to your needs. Then you can
program the rest of the week by programming each day individually, or by using the COPY function.
2
1
3
4
5
Set Program
COPY FUNCTION - When temperature override is activated, other users cannot increase
the temperature.
16
P2
P3
P4
P1
MO TU WE TH FR SA SU
PM
SET
START
TIME
PROGRAM
PERIODS
TEMPERATURE
SETTING
WEEKDAYS
CLOCK
SYMBOL
6