®
4530
3
BEFORE INSTALLING
Prior to the installation process, thoroughly review and adhere to the following items.
• Use only a Digital or Analog Volt Meter - DO NOT USE TEST LIGHT!
• Check for possible installation locations for the GPS unit prior to permanent
installation.
• ALWAYS LOOK BEFORE DRILLING. Make sure that the installation process
does not cause damage to any vehicle hose, electrical loom, or cause physical
damage to the vehicle.
• Make note of the unit serial number prior to installation.
• Prior to working on any part of the dashboard (instrument cluster, center
console, glove box, etc.), remove the negative and positive terminal from the
battery to deactivate the sensors for the airbags. Refer to the Owner’s Manual
and to a Shop Manual for the vehicle for specific instructions in the temporary
deactivation process.
• DO NOT place objects, including communication equipment, in the area over the
airbag or near the airbag deployment area.
• Refer to the Owners Manual and to a Shop Manual of the vehicle for specific
information related to the electrical wiring, interior disassembly, and any other
mechanical aspects of
the vehicle.
®
auto
PRO
GPS
auto
pro
®
