Uplift Desk CHR458 Quick Start Manual Download Page 4

© UPLIFT Desk

 • 800-349-3839 • [email protected] • upliftdesk.com

Normal-

 Vacuum your fabric seat as needed. Vacuuming picks up dust and reduces the need for professional cleaning.

Ink Stains-

 Apply a small amount of isopropyl alcohol to a clean and damp absorbent cloth. Start at the outside of the ink 

stain and work toward the center. Apply pressure, but do not rub too vigorously. As you work and your cloth soaks up 
the ink from the fabric stain, it’s important to use a clean section of the cloth or the stain will spread. Apply more isopropyl 
alcohol to the cloth as needed. If the ink stain persists, try using acetone. Note: This procedure is not intended for day-to-
day cleaning.

Spot Cleaning-

 Immediately soak up the stain with a soft, absorbent cloth. Do not dry the stain completely, as this may 

set it in the fabric permanently. The longer a stain is allowed to remain on the fabric, the more difficult it is to remove.

Oil-based Stains-

 Use a dry cleaning solution applied with a damp clean cloth or sponge. Test the cleaning solution on a 

small, concealed spot on the fabric first before attempting on a larger area. If there is no spotting, ringing, or damage to 

the fabric or its dyes, apply the cleaning solution to the soiled area with light, quick strokes. Begin at the outside of the 
stain and work toward the middle, making sure you use a clean part of the cloth as you work.

Water-based Stains-

 Use a water-based fabric cleaner (specifically made for cleaning fabric) or a solution of mild, alkaline, 

warm soapy water. Make sure that the soap and water mixture is not overly soapy. Test on a small, concealed section 

of the fabric first before applying to the main area. Work the cleaner or soap/water mixture into the stain on the fabric, 

starting from the outside of the fabric and working your way to the middle.

*A note about fabric care

Recline Adjustments

When the lever on the left-hand side is pushed DOWN, 
the Back is locked. When it is pulled UP, the Back will 
freely recline. 
To lock the Back in one of the three positions, pull the 
lever into the UP position, recline to the desired po-
sition, then push the lever DOWN to lock the Back in 
place. 

To return the chair to its original position, flip the lever 

UP and lean back slightly. You will hear/feel a “click” 
which will then allow the chair Back to return to its 
original position.

locked

unlocked

CAUTION:

 Read all instructions before assembly. Failure to assemble or operate properly may 

result in damage or personal injury. Retain manual for future reference.

CAUTION:

 This product’s maximum weight capacity is 250 lb (113.4 kg). DO NOT exceed the 

maximum weight capacity.

CAUTIONS & WARNINGS

!

!

!

Copyright Notice: 

This guide is a component of this chair. This guide is a part of the scope of delivery, even if the item is resold. This guide is also available on the UPLIFT Desk website: upliftdesk.com. Excerpts or cop

-

ies may not be forwarded to third parties or used in any other published form without the prior written consent of UPLIFT Desk. These instructions are subject to United States copyright law.

©

AI-CHR458-3.2

Summary of Contents for CHR458

Page 1: ...rrive inserted into the Back Simply remove them using the Allen Wrench and then use them to attach the Back to the Seat following the steps below A Place the Seat upside down on the edge of a sta ble surface such as a table B Insert the tab of the Seat into the slot on the Base and line up the holes for the Back and the Seat Have a friend keep it steady while you attach the Back to the Seat C Usin...

Page 2: ... A The Headrest fits into the Back in a specific way Look for the lower holes on the rubber portion of the Headrest fig 01 and the recessed tab in the Back fig 02 These two parts fit together B Angle the Headrest back lining up the slots on the Headrest with the tabs on the Back and tilt the Headrest forward firmly to fit the two parts to gether C Insert two M6x20 Screws and tighten using the Al l...

Page 3: ...side be low the Seat Slide the Seat forwards or backwards as you desire Release the lever to lock To return the Seat to the back position pull the lever and lift yourself off of the Seat The Seat will slide back on its own Lumbar Height Adjustment To adjust the Lumbar Support grab the tabs on either side of the Lumbar Support on the Back of the chair and slide it up or down to the desired height E...

Page 4: ...er specifically made for cleaning fabric or a solution of mild alkaline warm soapy water Make sure that the soap and water mixture is not overly soapy Test on a small concealed section of the fabric first before applying to the main area Work the cleaner or soap water mixture into the stain on the fabric starting from the outside of the fabric and working your way to the middle A note about fabric...

Reviews: