background image

16 

Electronics Line 3000 Ltd. Limited Warranty 

EL and its subsidiaries and affiliates ("Seller") warrants its products to be free 
from defects in materials and workmanship under normal use for 24 months 
from the date of production. Because Seller does not install or connect the 
product and because the product may be used in conjunction with products not 
manufactured by the Seller, Seller can not guarantee the performance of the 
security system which uses this product. Sellers' obligation and liability under 
this warranty is expressly limited to repairing and replacing, at Sellers option, 
within a reasonable time after the date of delivery, any product not meeting the 
specifications. Seller makes no other warranty, expressed or implied, and makes 
no warranty of merchantability or of fitness for any particular purpose. In no 
case shall seller be liable for any consequential or incidental damages for breach 
of this or any other warranty, expressed or implied, or upon any other basis of 
liability whatsoever. Sellers obligation under this warranty shall not include any 
transportation charges or costs of installation or any liability for direct, indirect, 
or not be compromised or circumvented; that the product will prevent any 
persona; injury or property loss by intruder, robbery, fire or otherwise; or that 
the product will in all cases provide adequate warning or protection. Buyer 
understands that a properly installed and maintained alarm may only reduce the 
risk of intruder, robbery or fire without warning, but is not insurance or a 
guaranty that such will not occur or that there will be no personal injury or 
property loss as a result. Consequently seller shall have no liability for any 
personal injury, property damage or loss based on a claim that the product fails 
to give warning. However, if seller is held liable, whether directly or indirectly, 
for any loss or damage arising from under this limited warranty or otherwise, 
regardless of cause or origin, sellers maximum liability shall not exceed the 
purchase price of the product, which shall be complete and exclusive remedy 
against seller. No employee or representative of Seller is authorized to change 
this warranty in any way or grant any other warranty.  

WARNING:

 This product should be tested at least once a week. 

CAUTION:

 Risk of explosion if battery is replaced by an incorrect type. Dispose 

of used batteries according to local regulations. 

 

 

 

Summary of Contents for InSight





















Reviews: