13
Step 2: Test a keypad
1.
Go to the main display and press
'√'
.
2.
Insert the Installer code (default code '1111').
3.
Select
[7]>[04]>[2]
(Service
>
Transmitters
>
TX Test) to initiate the TX
communication test. Review the explanation in the zones section.
4.4.2.4. Wireless Siren
Step 1: Register a wireless siren
The iConnect supports an external 2-way wireless siren.
1.
Go to the main menu and select
[9]>[1]>[5]
(Programming
>
Devices
>
Siren).
The system initiates Registration mode.
2.
Press the siren tamper switch. When '
Save?'
appears on the Control System’s
LCD display, press
'√'
.
3.
Continue and define the siren parameters:
WL siren delay
: time interval the wireless siren is not heard. This occurs as
soon as an alarm is triggered
Siren cut of time
: Duration of the siren after an alarm has occurred
Wired siren
(Main unit internal siren): Enable /Disable the build in siren in on
the main unit during alarm.
Step 2: Test the siren
1.
Go to the main display and press
'√'
.
2.
Insert the Installer code (default code '1111').
3.
Select
[7]>[04]>[2]
(Service
>
Transmitters
>
TX Test) to initiate the TX
communication test. Review the explanation in
Detectors
section.
4.4.3. Delete Wireless Device
Deleting a wireless device in the iConnect requires two steps as described in
Table 6
.
