UP3D TECH CO.,LTD
50
A3. You can do a one-point alignment or a 3-point alignment by selecting the percentage in the
fractional alignment when both of them fail.
100%: Align the entire model
75%: Model alignment from 75% below the occlusion
50%: Model alignment from 50% below the occlusion
25%: Model alignment from 25% below the occlusion
A4.The system prompts you to manually align and if the current alignment result is correct, you do
not need to manually align, you can click
【
Apply
】
to execute the current alignment result.
For the model needs to be manually selected for alignment, you can re-select the position by
clicking the [Reset Current] button when the position of the selected point is wrong or you can
directly move the point to another location or double-click the point, delete the point, and re-select
the point location.
It will enter status of all alignment completed after the alignment is successful and the alignment
result can be visually checked.
【
Reset all
】
: It will cancel the result of automatic alignment and perform manual alignment after
clicking this button.
Figure4-9
(8) Next, enter the export step and the order scanning is finished.
The alignment will be completed automatically if the selection is correct, a prompt
dialog box will pop up if no alignment is successful and you will re-select the point
for alignment after clicking OK
