UP Summit XC2 Owner'S Manual Download | Manualshive

Page: 40 / 60

background image

______________________________________________________________________________

40

Checks and repairs

Repairs and periodic checks

should ONLY be carried out by

UP, or by UP approved

checking centres. Failure to

comply with this will forfeit

the certification. Consult:

www.up-paragliders.com under

Service to find a check centre near you.

At UP we invest our entire knowhow in
paragliding into making the sport safer for
you. We offer a variety of services all
centred around safety to our customers.

Maintenance

All care and maintenance must be carried
out in accordance with UP
recommendations. To ensure that this
happens we strongly advise you to only let
UP recognised service centres touch your
wing

– this is also a prerequisite for the

UP Warranty to be valid. So there‟s a lot
speaking for letting UP, or a UP affiliate,
look after your Summit XC²!

Airworthiness Check

In Germany and Austria all paragliders
must be checked according to the
following time schedule:



2 years after the first flight



Every two years after that, or sooner if
prescribed by the UP checking facility
during the last check



After 150 hours of flying



After 100 flights

These limits have been set by the German
Free Flight Federation (DHV) and make
no less sense for wings flown outside of
Germany/Austria. Contact your local

dealer for information about the
nearest UP approved checking facility.

We will happily service the glider more
often, if you feel that it is necessary.

CAREFUL!

If you notice new

or unusual behaviour from

your wing please hand it

in for immediate

inspection at a UP Service

centre.

UP Craftsmanship

In order to ensure that your UP
Summit XC² maintains its very high
inherent performance and safety we
highly recommend that you employ
UP, or a UP affiliate, with any repairs
or maintenance. Our service staff is
trained and skilled, and knows the UP
wings better than anyone.

UP Warranty

Conditions and extent of the UP
International Warranty can be found in
the following pages. For further
information please ask UP
International directly, or you local
representative. The UP importer in
your country is always delighted to
clear any questions with you.

National warranty
conditions

In some countries the local laws
stipulate different warranty rules than
those outlined here. Please note that
these local rules only apply in the
country where you have purchased
your wing. Information about local
rules and conditions are available from
your local dealer.

«
...
38
39
40
41
42
...
»

Summary of Contents for Summit XC2





























































Reviews:

No comments

Related manuals for Summit XC2

S-LSA Glider 02/U15

Brand: Phoenix Pages: 85

Brand: P&M Aviation Pages: 68

Brand: RedWing RC Pages: 54

Brand: Hubsan Pages: 14

Brand: SKY PARAGLIDERS Pages: 33

Brand: Textron Pages: 18

RANS S-20 RAVEN-20cc

Brand: Seagull Pages: 40

Brand: Swing Pages: 32

Brand: Swing Pages: 45

Brand: DG Flugzeugbau Pages: 54

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands