K. WARRANTY
Unwin products are extensively tested using Unwin anchorage systems, and our full warranty
normally only applies to Unwin equipment when used with Unwin branded anchorages or as
instructed.
For further details on specific applications please contact the Sales Office.
In other situations, using Unwin products, for which Unwin has not participated in a joint test
program, a limited Unwin warranty will apply.
USING THE SEAT BELT— Seat belts should be worn on all journeys
When in use the lap belt part of the seat belt should be positioned on
the bony part of the hip and the buckle should lie on or below the
hip. When inserting a tongue into a buckle ensure that a positive
audible ‘click’ is heard.
TESTING THE HARNESS
The design of the reel makes it lock the webbing by both a sudden withdrawal of the webbing
and deceleration, or cornering of the vehicle. To test the former mode of locking, rapidly pull
the webbing from the reel. The reel should lock within a few inches. To test the second mode
of locking the vehicle may be parked on a sharp incline (approximately 30°), the reel should
lock and hold the webbing in place. The lock will disengage itself automatically when the
vehicle is level.
WARNING
Always ensure that the belt is not twisted on the body, or through the anchorage points.
Always wear the belt as a complete lap and diagonal assembly. Do not use the belt for more
than one person, even small children. Do not allow the belt to chafe against sharp edges.
Periodically inspect the webbing for abrasion, paying particular attention to anchorage points
and adjusting devices. Any safety belt which has been subjected to a shock load should in the
interest of safety, be renewed.
L. WEARERS BELT INSTRUCTIONS
Summary of Contents for EasiSit
Page 11: ...N CHECK LIST ...
