19
Connecting video cables
As shown in
Figure 2-4
, connect one end of a video cable to the video
input or output port of the device, and connect the other end to the
video device.
For the DVI-D input port and DVI-I output port, you can use a
DVI-to-HDMI cable or a DVI-to-VGA cable, or use adapter connector to
connect to a proper video device. For more information about adaption
ports, see
Table 1-2
.
NOTE!
Do not over-bend, twist, or heavily press HDMI cables.
Connecting Network Cables
As shown in
Figure 2-4
, connect one end of the network cable to the
Ethernet copper port of the device, and connect the other end to the IP
network.
Connecting the AC Power Cord
WARNING!
Before you connect the power cord, make sure the power switch of your
device is turned off to avoid possible bodily injury and device damage.
1.
Take out the cable-retention clip from the package, and install it to
your device, as shown in
Figure 2-7
.
Summary of Contents for DC4304
Page 1: ...Video Decoders Quick Guide Manual Version V1 00...
Page 33: ...BOM 3101C0CJ...