11
Installation procedure
1.
As shown in
Figure 2-2
, put the screw-hole side of the bracket
against the chassis tightly, align the screw holes on the bracket
with those on the chassis, and then fix the bracket to the chassis
tightly with two M4*8 screws.
2.
Use the same method to install the other mounting bracket.
Figure 2-2
Installing the mounting brackets
1: Screws (four)
2: Mounting bracket
3: Waist-shaped hole
4: Screw hole
Installing the Device in the Rack
Place your device horizontally to a proper position in the rack, and align
the mounting brackets along the front posts of the rack. Put the screws
through the waist-shaped holes to contact the floating nuts on the front
posts, and fix the mounting brackets to the front posts of the rack, as
shown in
Figure 2-3
.
1
2
4
3
Summary of Contents for DC4304
Page 1: ...Video Decoders Quick Guide Manual Version V1 00...
Page 33: ...BOM 3101C0CJ...
