English
Appliances with disconnected plug
&MFDUSJDBMDPOOFDUJPOTTIPVMECFQFSGPSNFECZNPVOUJOHBQPXFSQMVH OPUTVQQMJFEPGUZQFBOEMPBEBEF
-
RVBUFUPUIFNBYJNVNQPXFSBCTPSCFECZUIFPWFOhTQIBTFT
A
EBUBBWBJMBCMFPOUIFBUUBDIFEi5FDIOJDBM
TQFDJöDBUJPOTwTIFFU*GUIJTJTOPUQPTTJCMFUIFXJSJOHDBCMFTTVQQMJFECZ6/09BSFTVóDJFOUGPSEJSFDUDPO
-
nection to the electrical board
B
.
Before connecting the appliance to the mains electricity, always compare the power supply data with that of
the appliance specified on the rating plate.
The appliance
JTJTTVFEGSPNUIFGBDUPSZXJUIJUTQPXFSTVQQMZDBCMF 7_1)/1&)[UISFFQIBTF
-
OFVUSBMHSPVOEBMSFBEZNPVOUFEPOUPUIFUFSNJOBMCPBSEGPSEJòFSFOUWPMUBHFBOEQPXFSMPBETDPOTVMUDIBQUFS
“
Adapting to different voltage
”
at page
.
The wiring diagrams, the wire specifications
BOEUIFUFDIOJDBMEBUBBSFJOEJDBUFEPOUIFi5FDIOJDBMTQFD
-
JöDBUJPOTwTIFFUBUUBDIFEUPUIFBQQMJBODF
A
B
For proper electrical connections, the appliance must:
- Be wired into an equipotential system in accordance with current regulations. This connection must be per-
formed between different appliances with the terminal marked with the equipotential symbol
. The
DBCMF NVTU IBWF B NBYJNVN DSPTTTFDUJPO PG NN BT QVSTVBOU PG $&* &/ BOE NVTU CF ZFM
-
low-green
- Must be grounded
UPUIFFBSUIJOH HSFFOZFMMPXXJSF
- Must be connected to a thermal differential switch in compliance with the regulations in force.
- Must be connected to an omnipolar circuit breaker.
OMNIPOLAR CIRCUIT
BREAKER
HSPVOE ZFMMPXHSFFO
neutral
CMVF
UISFFQIBTF ---
CSPXOHSFZCMBDL
THERMAL
+ MAGNETO-THERMAL BREAKER
