Unox ChefTop XC314, Instruction Manual

Page: 12 / 42

ChefTop™
3
FRANÇAIS
ChefTop™
7. LES PANNES PLUS FRÉQUENTES
BREAKDOWN CAUSE SOLUTION
The hood is not connected to the
power mains
Connect the hood to the supply
mains
The hood is not connected to the
oven
Connect the hood to the oven
Interrupted or damaged oven-
hood connecting cable
Apply to a qualified UNOX
technician for service
Damaged hood motor
Apply to a qualified UNOX
technician for service
Damaged motor starting
condenser
Apply to a qualified UNOX
technician for service
Damaged hood power card
Apply to a qualified UNOX
technician for service
Damaged oven control board
Apply to a qualified UNOX
technician for service
When a cooking program starts,
the hood does not work
Damaged oven power card
Apply to a qualified UNOX
technician for service
Interrupted or damaged oven-
hood connecting cable
Apply to a qualified UNOX
technician for service
Damaged hood motor
Apply to a qualified UNOX
technician for service
Damaged hood power card
Apply to a qualified UNOX
technician for service
Damaged oven control board
Apply to a qualified UNOX
technician for service
Damaged oven power card
Apply to a qualified UNOX
technician for service
When you open the door of the
oven, the hood motor does not
pass to high speed
Damaged oven door switch
Apply to a qualified UNOX
technician for service
Closed water inlet Open water inlet
Not correct connection to the
water supply
Check the connection to the
water supply
Dirty water inlet filter Clean the filter
Damaged water solenoid valve
Apply to a qualified UNOX
technician for service
Damaged temperature probe
Apply to a qualified UNOX
technician for service
Fumes condensating system does
not work
Damaged hood power card
Apply to a qualified UNOX
technician for service
8. MESSAGES D’ERREURS HOTTE
BREAKDOWN CAUSE SOLUTION
The connection wires of the
temperature probe 1 are
disconnected from the power
card
Apply to a qualified UNOX
technician for service
Damaged temperature probe
Apply to a qualified
UNOX
technician for service
The display panel 1 shows the
message EC1 continuously.
Damaged hood power card
Apply to a qualified
UNOX
technician for service
B. INSTRUCTIONS POUR L’INSTALLATEUR