Unox BakerTop, Installation Manual

Page: 5 / 120

5
EN
Safety regulations for installation
- Read this guide carefully
before installing or maintaining the appliance, and conserve this
guide with care for any future consultation of users.
- All installation, assembly and non-routine maintenance operation must be per-
formed exclusively by qualified technicians that are authorized by UNOX, in compli-
ance with the regulations in force in the user country, with respect to the regulations
on systems and work safety.
- Disconnect the oven from its electrical and gas supplies before installation or main-
tenance (only for gas ovens).
- Check that systems are compliant to the installation country standards and to the
specifications indicated on the appliance rating plate before installing the appliance.
- Interventions, tampering or modifications not expressly approved that do not com-
ply with the instructions in this manual could cause damage, injury or death.
- Furthermore, interventions, tampering or modifications not expressly authorised
that do not comply with the indications in this manual shall invalidate the guarantee.
- Installation or maintenance that fails to respect the indications in this manual may
cause damage, injury or fatal accidents.
- Persons not involved with appliance installation may not pass through or occupy
the work area during appliance assembly.
- If the equipment is installed on mobile bases or stacked in columns, be sure to use
only UNOX components and respect the instructions on their packaging.
- Given their potential danger, the packaging materials must be kept out of reach of
children and animals, and correctly disposed of in compliance with local regulations.
- The ratings plate provides essential technical information that is of utmost impor-
tance for any appliance maintenance or repairs. Do not remove, damage or modify
the plate.
- Failure to follow these instructions can cause damage and injury or death, voids the
warranty and exempts UNOX from any liability.
- The parts protected by the manufacturer or his agent shall not be adjusted by the
installer.
- The appliance can be used by children of 8 years and over and by people with re-
duced physical, sensory or mental capabilities or people lacking the experience or
knowledge needed, provided they are supervised or have received instructions on
how to use the appliance safely and that they understand the inherent dangers. Chil-
dren must not play with the appliance. User cleaning and maintenance must not be
carried out by unsupervised children.
- When cleaning any component or accessory NEVER use water jets.
- The new hose-sets supplied with the appliance are to be used for the connection to
the water supply network. Old hose-sets should not be reused.
- For proper electrical connections, the appliance must:
- Be wired into an equipotential system in accordance with current regulations.
This connection must be performed between different appliances with the termi-
nal marked with the equipotential symbol
. The cable must have a maximum
cross-section of 10 mm 2 (pursuant to standard CEI EN 60335-2-36) and be yel-
low-green.