15
Industrial/EasyLAN 100i Interface Kit for XP – Installation Instructions Ed. 1
Chapter 4 EasyLAN 100i Setup
Reading an Assigned
IP Address
If you want to read an IP address that has already been assigned—
either manually or automatically—without changing any settings,
proceed as follows:
• Press the Setup key on the printer’s built-in keyboard. This
message appears in the display window:
SETUP:
SER-COM, UART1
• Press the F4 key and the following message appears:
SETUP:
NETWORK
• Press the Enter key. The display shows:
NETWORK:
IP SELECTION
• Press the F5 key. The display shows:
NETWORK:
IP ADDRESS
• Press the Enter key. The display shows for example:
IP ADDRESS:
192.168.1.79
• Read the IP address. When ready, press the Enter key.
NETWORK:
NETMASK
• Press the Enter key. The display shows for example:
NETMASK:
255.255.255.0
• Read the netmask address. Then, press the Enter key.
NETWORK:
DEFAULT ROUTER
• Press the Enter key. The display shows for example:
DEFAULT ROUTER:
192.168.1.1
• Read the default router address. Then, press the Setup key to leave the Setup
Mode.
