![background image](http://html1.mh-extra.com/html/unova/intermec-easycoder-501/intermec-easycoder-501_installation-instructions-manual_1060333002.webp)
EasyCoder 501/601 – Installation Instructions
1
DUAL SERIAL INTERFACE KIT
The Serial Interface Board adds two serial communication ports
("uart2:" and "uart3:") to the standard serial communication port
("uart1:").
The printer's software detects when a Serial Interface Board is
installed and adds communication and buffer setup options for the
two additional communication ports.
When a Serial Interface Board is fitted, the following types of
interfaces become available:
"uart1:"
Fitted on printer's CPU board.
RS 232C
Standard.
RS 422 or 20 mA CL
Option. Additional circuits required.
"uart2:"
Fitted on Serial Interface Board.
RS 232C
"uart3:"
Fitted on Serial Interface Board.
RS 232C or 20 mA CL
Selected by means of strap.
The Dual Serial Interface Kit consists of:
• 1 Serial interface board assy.
• 2 Screws MRX-Z 3
×
6 FZB (not intended for EasyCoder 501/
601)
• Installation Instructions
Introduction
"uart1:"
"uart3:"
"uart2:"
230V
0
Note:
Illustrations show an EasyCoder 501.
The principles for fitting this optional
equipment in an EasyCoder 601 are
exactly the same.
EasyCoder 501/601
Dual Serial Interface Kit
Installation Instructions
Edition 2, September 1998
Part No. 1-960345-02
All manuals and user guides at all-guides.com