![Unold 58255 Instructions For Use Manual Download Page 27](http://html1.mh-extra.com/html/unold/58255/58255_instructions-for-use-manual_1059872027.webp)
27
pans can cause damages of the
appliance.
7. The non-stick-coating of coated
saucepans and frying pans can be
damaged if used with too strong
heating. Please follow the infor-
mation of the saucepan manufac-
turer with regard to the applica-
tion of the pots.
8. Choose in the case of doubt a
lower power setting or tempera-
ture to avoid damages. Put the
saucepan always precisely in the-
middle of the cooking field to
avoid error messages and automa-
tic switching off.
FUNCTIONING
Cooking on an induction cooker saves
up to 50 % of electric power. The coo-
king time is reduced by up to 30 %.
When cooking on an induction coo-
ker, not the hotplate is heated, but
the saucepan on it, provided that the
bottom is ferromagnetic. The heating
is effected by a magnetic alternating
field below the hotplate.
The advantages of induction cooking
are:
Short reaction time, short prehe-
ating time, quick and exact hea-
ting.
Rapid heating, since the full
amount of enery is immediately
available.
Cool hotplate, which is only hea-
ted by the heat reflected from the
saucepan.
Great energy saving of up to
50%.
Easy cleaning, as food cannot
burn in case of boiling over.
High safety: as soon as the sau-
cepan is taken away from the
plate, the heat supply is stopped
automatically.
SAFETY FUNCTIONS
1. Overvoltage / low voltage protection
When power voltage is too high or too
low, the induction cooker will compen-
sate the voltage automatically and will
adjust the output power.
2. Overheating protection
When the temperature of the hotplate
is too high, the induction cooker will
stop automatically and a long buzzer
sound will be heard to alert you un-
til the temperature returns to normal
(fault E 5).
3. High voltage pulse protection
During operation, when power supply
receives a transient high voltage pulse
(e.g. lightning strike), the induction
cooker will stop automatically and in
one minute will resume automatically.
4. Small metal part protection
If small iron metal parts with a diame-
ter of less than 80 mm are detected on
the hotplate, the appliance cannot be
switched on.
Copyright UNOLD AG | www.unold.de