Unold 48946, Instructions For Use Manual

Page: 19 / 60

19
13. Maintain a distance of at least
15 cm from other objects to
ensure sufficient ventilation of
the appliance.
14. Make sure that the power cord
does not hang over the edge of
the countertop or table, since this
can cause accidents, for example
if small children pull on the cord.
15. Do not operate or store the ice
cube maker outdoors.
16. Use the appliance only after it has
been properly assembled.
17. Fill the water tank only with clear,
cold water.
18. Do not insert any objects in the
interior of the appliance, to avoid
injuries.
19. After unpacking, do not operate
the appliance for at least two
hours, to prevent damage to the
compressor.
20. Do not switch the appliance on
and off repeatedly, since this can
damage the compressor. There-
fore, the appliance should be ope-
rated for at least three minutes.
21. Switch off the appliance and
unplug it from the power sup-
ply before moving it, to prevent
damage to the appliance.
22. Do not use the appliance with
accessories of other manufactur-
ers or brands, to prevent damage.
23. Unplug the appliance from the
power supply after use and prior
to cleaning. Never leave the
appliance unattended when it is
plugged in to the power supply.
24. Clean the appliance after every
use (see chapter on Cleaning and
Care).
25. Never attempt to repair the appli-
ance yourself, since this can
result in electric shock.
26. Check the appliance, the plug and
the power cord regularly for wear
or damage. In case of damage to
the power cord or other parts, ple-
ase send the appliance for inspec-
tion and repair to our after sales
service. Unauthorized repairs can
result in serious risks to the user
and void the warranty.
27. If the supply cord is damaged, it
must be replaced by the manu-
facturer or its service agent or a
similarly qualified person in order
to avoid a hazard.
The manufacturer will not be liable in the event of improper or incorrect use or if repairs are carried out
by unauthorized third parties.
BEFORE USING THE APPLIANCE THE FIRST TIME
ƒ
When unpacking the appliance and removing the packaging material, make
sure not to tilt the appliance more than 45 °, to prevent damage to the
compressor inside the appliance.
ƒ
If you wish to move the appliance, please use the handles on the bottom
of the appliance.
After unpacking, please do not operate the appliance for at least two
hours. The coolant in the appliance has to first settle, to prevent damage
to the compressor.
1. Remove all packaging materials
and any transport safety devices.
2. Check to make sure that all acces-
sories are present.
3. Clean all parts with a damp
cloth, as described in the chapter
“Cleaning and care”.
4. Check to make sure that all parts
are assembled correctly and the
appliance is stable and level.
5. Now connect the power cord to
the back of the appliance.
6. Connect the appliance via the
power cord to the power supply
(220–240 V~, 50 Hz).
7. The indicator lamp for medium
ice cubes (12) blinks green.