Before to start be sure the Blender is perfectly steady . It is recommended to
work with the machine placed on a 850 mm high table .
Before to use it , the parts to be in contact with the product to be processed shall
be washed with water and soap . To clean your TA-04 read item No. 3.3 Cleaning Pg 03 .
02
1.3 Technical Characteristics
2.1 Installation
To achieve a good performance the TA-04 Blender shall be installed on a
steady and flat surface about 850 mm above the floor .
The TA 04 Blender has been designed for 110 V (60 c/s) or 220 V (50 c/s or
60c/s ) voltages . Check the voltage , to be sure the electric source has the same voltage
indicated on the label placed on the cord .
The cord plug has two round pins. It is mandatory to have the cord plugged
into the socket before to Switch ON the machine .
2. Installation and Pre-operation
2.2 Pre-Operation
Important
When placing the Bowl No. 02 ( Pic. 01) , check if it is well fitted . The fitting
system assures the Bowl to be steady in eight positions , therefore giving a
perfect performance guaranty .
07
4.4 Operation
4.4.1 Warnings
Long hairs , that could touch the machine , could cause serious accidents .
Tie them or cover them with a head scarf .
Only skilled operators shall use the machine .
NEVER use the machine without any of its safety devices normally
operating.
4.6 Maintenance
4.6.1Dangers
With the machine switched ON any maintenance operation is dangerous .
UNPLUG THE MACHINE FROM ITS SOCKET DURING THE WHOLE MAINTENANCE
OPERATION TIME .
4.5 After work end
4.5.1 Cares
Always clean the machine . Before to clean it ALWYS UNPLUG IT FROM THE SOCKET .
Never start to clean before the motor is COMPLETELY STILL .
Be sure all the machine components are in their due places before to start to work again .
IMPORTANT
Always unplug the machine during emergencies .
Electrical or mechanical maintenance shall be made by qualified
persons .
The maintenance responsible shall be sure the machine is working in
TOTAL SAFETY conditions .
4.7 Advices
Tabela - 01
(*) Observation : Frequency and Voltage will be the one indicated
on motor label
.
110 or 220 *
50 or 60 *
1200
1,2
550
230
200
1,2
Voltage
Frequency
Power Rating
Consumption
Height
Width
Length
Net weight
Gross weight
[V]
[ c/s ]
[w]
[kw/h]
[mm]
[mm]
[mm]
[kg]
[kg]
1,3
Cup maximum capacity
Rotation
[l]
[ rpm]
4
22000
