27
5.
Media Closing
Up to five different media (total) keys may be used to close a transaction. Addition to these media keys, there
are four preset tender keys that close a transaction by one-action which have preset tendering amounts.
The following closing methods are available.
Direct Closing :
Press a media key directly.
registrations ---
TTL
Tendering Input :
Enter a tendered amount then press a media key.
Short tendering amount input prohibited for TTL 5 if [SF-64.b] is programmed.
registrations ---
SBTL
--- enter tendered amount ---
TTL
When entered amount is over the due amount, the change is calculated automatically in cash if
"automatic change" has been programmed.
If "automatic change" has not been programmed, a designated media should be pressed for the
change as follows;
registrations ---
SBTL
--- enter tendered amount ---
TTL
---
TTL
Preset Tendering :
One-action closing to speed up tendering by use of a preset amount media key.
Preset tendering amount is memorized in the memory of pre-programmed media
number by [SF-58,59].
registrations ---
SBTL
---
PRESET
TENDER
Media Multiplication :
Makes it easier to sum up tendered amounts by using
Ten-Keys
and
X2
key. This
function is available only when using one of four preset tender keys.
registrations ---
SBTL
--- enter number of pieces ---
X2
---
PRESET
TENDER
The following depend on programming:
- automatic change;
- tendered amount input prohibited or compulsory;
- drawer open after media closing;
- cheque-cashing functions (refer to 10. Cheque Cashing / Cheque Printing section);
- cheque printing (refer to 10. Cheque Cashing / Cheque Printing section).
