2
Transmitter
1. Antenna
2. LED Power/Signal indicator
3. LCD battery status
4. LCD channel lock
5. LCD selected channel
6. Aux-in socket
7. Up/Down button
8. Power button
9. Built-in microphone
10. Mic-in socket
11. Mute/Sync button
12. Belt clip/Lanyard tie-up
Power on/off
•
Press and hold power button
for 1 second to turn the transmitter on.
LCD screen shows
and then last used channel.
•
Press and hold power button
for 2 seconds to turn the transmitter off.
LCD screen shows
and then shuts down.
Channel lock/unlock
•
Channel will automatically be locked and symbol
shows up if the device is idle for 5
seconds after being turned on.
•
To unlock the channel, press buttons and simultaneously for 2 seconds until symbol
disappears.
Channel selection
•
Press button or to select preferred channel when channels are unlocked.
Sensitivity adjustment
•
When channel is locked, press and hold for 2 seconds to enter mode .
•
Press either button
to adjust the sensitivity (Default:
).
•
Press power button
to confirm the setting.
Mute/Sync
•
When the mute button is pressed down, no sound reaches the microphone. Note that the mute
button also is used for synchronization (see below).
