19
Default Settings
Rear panel
Input 1
1. Flat/Speech; DOWN (= speech enhancement off)
2. Line/Mic; DOWN
3. Line/Mic; DOWN
4. Phantom/off; UP (= phantom power off)
Input 2
1. Flat/Speech; DOWN (= speech enhancement off)
2. 50-100V/off; UP
3. 50-100V/off; UP
4. Override/off; UP (= override off)
Monitor Control
Set fully anti-clockwise (factory default)
Front panel
All level controls are set to minimum (turned fully anti-clockwise).
System Diagnostic = Off (switch in left position).
Parametric MLC = 2kHz (switch in right position), level control in min position.
Turn clockwise to change.
(= line level is selected)
(= 100V line off)
Note
To listen to the sound quality, use high quality headphones with the FSM 2.0 or Univox
®
Listener loop receiver.
The ‘Monitor’ Output socket is a direct reflection of the loop signal current (volume control
on rear panel). The sound quality can be easily assessed at this point in the audio chain
aiding set up and problem solving.
