WF-M63B-USH1
IEEE 802.11a/b/g/n/ac 2T2R USB WIFI Module&BT2.1+EDR/4.2/5.1
8
.
DC Characteristics
Symbol Parameter
Min
Type Max
Unit
DVDDIO
3.3V IO
Voltage
2.97
3.3
3.63
V
V
IL
Input Low Voltage
-0.3
-
VDD33*0.25
V
V
IH
Input High Voltage
VDD33*0.625
-
VDD33+0.3
V
V
OL
Output Low Voltage
-0.3
-
0.4
V
V
OH
Output High Voltage
VDD33-0.4
VDD33+0.3
V
FCC Statement:
Please take attention that changes or modification not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1)
This device may not cause harmful interference, and
(2)
This device must accept any interference received, including interference that may cause
undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
(1) Operational use conditions
Module has professional users use condition limitations, Host product manufacturer please ensure
giving such warning like “Product is limited to professional users use” in your product’s instruction.
(2) Antenna
used
Antenna type
Max. Antenna Gain
BT/BLE
PCB Antenna
0.37dBi
2.4G Wi-Fi
PCB Antenna
Antenna 1: 0.06dBi
Antenna 2: 2.65dBi
5G Wi-Fi
PCB Antenna
Antenna 1:
U-NII-1: 0.29dBi
U-NII-3: -1.16dBi
Antenna 2:
U-NII-1: 0.12dBi
U-NII-3: 0.99dBi
(3) Labelling Instruction for Host Product Integrator
Please notice that if the FCC identification number is not visible when the module is installed inside
another device, then the outside of the device into which the module is installed must also display a
label referring to the enclosed module. For FCC, this exterior label should follow “Contains FCC ID:
2AL8S-0302C3XN-1”. In accordance with FCC KDB guidance 784748 Labeling Guidelines.
§15.19 and RSS-Gen Labelling requirements shall be complied on end user device. Labelling rules
for special device, please refer to §2.925, § 15.19 (a)(5) and relevant KDB publications. For E-label,
please refer to §2.935.
