2
4
Disk Installation
The illustrations are for reference only. The actual device may vary.
4.1
Preparation
Prepare a 1# or 2# Philips screwdriver, a pair of antistatic gloves or a wrist strap.
Disconnect power before installation.
4.2
HDD Installation
1.
Loosen the four screws on the side panels, and remove the upper cover.
2.
Insert the screws into the disk and tighten the screws halfway. In the figure
below,
①
is screw,
②
is HDD.
3.
Slide the screws in step 2 into the chassis from A to B, and tighten them. Then
fasten another two screws to fasten the hard disk.
