97
3.
To use Network Time Protocol (NTP), enable auto update, set the
address and port number of the NTP server, and the update
interval.
4.
Click
Apply
to save the settings.
DST
1.
Click
System
>
Time
>
DST
.
2.
Enable DST by selecting the check box, and then set the start time,
end time, and DST bias correctly. The following shows an example.
3.
Click
Apply
to save the settings.
Time Synchronization
Use this function to synchronize camera time with the NVR. Time sync is
enabled by default, and cameras will synchronize time with the NVR
after getting online, and then synchronize once every 30 minutes.
1.
Click
System
>
Time
>
Time Sync
.
2.
Select
Sync Camera Time
and then click
Apply
.
CAUTION!
Use this function with caution if you have more than one NVR on the
network. An IP camera synchronizing time with multiple NVRs at the
same time will cause chaotic recordings.
