8
DC output switch will turn off
automatically.
USB output
1
Turn on the main power supply.
2
Press the USB output switch. After
that, the USB power supply is
started, the USB-A and Type-c ports
start to output power supply, and the
USB switch indicator is turned on at
the same time.
3
Press the USB output switch again.
After that, the USB power supply is
turned off, and the USB switch
indicator is turned off.
AC output
1
Turn on the main power supply.
2
Press the AC output switch. After that,
the 230 V AC output is turned on, the
AC socket starts to output power
supply, and the AC switch indicator is
turned on.
3
Press the AC output switch again. After
that, the 230 V AC output is turned off,
and the AC output switch indicator is
turned off.
When the output of AC port
is less than 15 W for 12 hours
continuously, the AC output switch will
turn off automatically.
You can press the AC output switch during AC charging to turn on the AC output to enter the EPS
mode, and then the AC socket can take power supply directly from the AC input port. In this case,
the power of charging and 230 V AC output cannot exceed the limit power of AC input (peak
value < 1800 W); otherwise, the AC input may be disconnected for protection. In EPS mode,
when the AC output power exceeds 1400 W, the AC input cannot power the battery, and
meanwhile the maximum AC output power is 1500 W. In EPS mode, once the power supply fails
due to abnormal AC input, the product immediately switches to battery power supply within 30
ms.
During DC charging, the 230 V AC can still output power supply normally, that is, charging and
discharging can be performed simultaneously.
