Univide UniWorkstation 5548, User Manual

Page: 71 / 102

67
5.2.3 Creating Integrated Mirroring Volumes
This section describes how to create Integrated Mirroring (IM) and Integrated Mirroring Enhanced (IME) volumes
using the LSI Logic SAS BIOS Configuration Utility (SAS BIOS CU).
5.2.3.1 IM Configuration Overview
You can use the SAS BIOS CU to create one or two IM or IME volumes on each LSI Logic SAS controller, with an
optional global hot spare disk. All disks in an IM or IME volume must be connected to the same LSI Logic SAS
controller.
Although you can use disks of different size in IM and IME volumes, the smallest disk determines the “logical” size
of each disk in the volume. In other words, the excess space of the larger member disk is not used.
Refer to Section 2.2, “IM Features,” for more information about Integrated Mirroring volumes.
5.2.3.2 Creating IM and IME Volumes
The SAS BIOS CU is part of the Fusion-MPT BIOS. When the BIOS loads during boot and you see the message
about the LSI Logic Configuration Utility, press Ctrl-C to start the CU. After you do this, the message changes to:
Please wait, invoking SAS Configuration Utility...
After a brief pause, the main menu of the SAS BIOS CU appears. On some systems, however, the following
message appears next:
LSI Logic Configuration Utility will load following initialization!
In this case, the SAS BIOS CU will load after the system has completed its power-on self test.
You can configure one or two IM or IME volumes per Fusion-MPT controller. You can also combine IM, IME, and
Integrated Striping volumes on the same controller, up to a maximum of 10 physical disk drives.