Operation manual
Pag. 7/14
VE 160-200-250-300
3. Machine identification
There is a plate on the machine casing, like the one illustrated, which carries indications concerning the manufacturer,
type of machine, serial number, electrical features, frequency, rated power, number of phases, year of manufacture
and mass.
3.1. Main components
•
Raw materials used: the machine is almost completely made of steel, cast iron, brass and plastic. All of these
components can be easily disposed of and are not dangerous to the environment and/or a hazard to personal
safety. Adequately separate the different materials for subsequent reuse or separate disposal.
•
Surface treatment: paint, electrolytic galvanizing, chemical nickel-plating, Teflon coating, electro polishing, to
ensure high technical performance, hygiene and durability.
•
The Sigma packages fully meet the requirements of Directive 94/62/EC and Legislative Decree 05/02/97 no. 22
(and subsequent amendments and additions) and so become waste similar to urban, that can be easily inserted
in any separate collection program.
