Only use non-toxic detergents specifically formulated for cleaning components
used with foodstuffs.
The knives are made of AISI 430 grade steel, therefore rust may form if they are
left immersed or wet.
We suggest drying them after they are washed.
- Turn the interlocked blade cover (Ref. 4 Fig. 6.4.1) by 90° and push it
towards the left: the blade guard will come off.
- Detach the blade cartridge lever (Ref. 5 Fig. 6.4.1).
- Take the cartridge (Ref. 2 Fig. 6.4.1) off the bars of the base using the
handle and pull it so that the blade pins detach from the drive mechanism.
-
Place the cartridge on the bars of the base (Ref. 1 Fig. 6.4.1).
- Put the blade cartridge and the guards in the dishwasher.
- Wash the base by hand using non-aggressive detergents.
- After completing the cleaning operations, assemble all the components
by following the instructions in reverse order (Chapters 6 and 7).
8 - Malfunctions and remedies
8.1 - Malfunctions: causes and remedies
Malfunctions
Causes
Remedies
The machine does not
start
The residual current circuit
breaker is set to “0”
Set the switch to “I”
The plug switch is set to “0”
Set the switch to “I”
The start button does not
work
Contact the technical as-
sistance service
The safety devices are not all
present or mounted properly
Check the safety devices
The product is not cut
correctly
The knives of the blade roller
are blunt
Sharpen the knives or
replace them
Univex Corp.
3 Old Rockingham Road
Salem, NH 03079 USA
