“ROTANTE” pizza oven
R-002 100218
Page 40 of 43
4
41-42-43-
44-45-46-
47-48-49-
4A-4B
–4C-
4D
– 4E- 4F
Temperature probe circuit board
general errors
@
NO Send to customer support
6
64-65-66-
67-68-69
Wiring board internal error YES YES
Serious error - contact
customer support
6
6A-6B-6C-
6D
Wiring board overflow parameter YES YES
Serious error - contact
customer support
7
70
Internal clock failure or
low/missing battery
YES YES
Serious error - contact
customer support
7
71
Deck overheating notice
NO NO
Sheated heating element is
on and the deck is not
rotating. Turn off the elec.
sheated element or restart
deck rotation.
F
F0
Base-Console communication
broken
YES YES
Serious error - contact
customer support
[§]
= If
“Sheated element” is set to “OFF” (Manual) there's no error reported
B
= Burner blocked
R
= Deck Rotation blocked
@
= It can be also used with burner in manual mode
RESET =
Manual resetting of the gas burner. In order to reset, press and hold the red
button next to the console
for 2 seconds
and release it. The displayed error will
disappear and you can try again to start it up.
If the suggested operation did not solve the malfunctioning, interrupt the
operation and ask for help to the customer support center.
Do not open the equipment's external covering if you're not expressly
authorized in writing by
Univex
. The non-observance to this rule will lead
to the immediate invalidation of the warranty and of the retailer's
ensuing responsibilities for aspects concerning safety and functioning.
