“ROTANTE” pizza oven
R-002 100218
Page 32 of 43
Graphic key switches the baking chamber's heating sheated
element status. The operating condition will be shown on the display.
The actual temperature is displayed in yellow above the status indicator.
The displayed temperature
does not indicate the cooking
deck’s
surface temperature
. The measurement is taken from the area below the
deck and is mainly used for the probe to regulate the automatic start/stop
cicle (description below).
The sheated element status is displayed on the
bottom part of the display and shows the sheated element behaviors
according to the user’s settings. The sheated element will be set OFF as a
default option.
Pressing the
graphic key once will change
the status to ON. In this status the sheated element will always be powered
until its status is manually changed. No thermostatic control is applied to
the sheated element.
Pressing the
graphic key again will change
the status to AUTOMATIC. This status has 3 different levels that help the
computer to determinate the Start/stop cycle for the sheated element.
Different parameters are taken into account to regulate the cycles and
higher regulation levels will increase the sheated element impact on the
deck’s temperature.
Graphic key will be displayed when AUTOMATIC mode is on.
Pressing this key will immediately start the sheated element for a fast pre-
heating cycle. It is used to help fast start the deck heating process at the
beginning of the work session.
