TROUBLESHOOTING GUIDE
TROUBLE
POSSIBLE CAUSE
REMEDY
1. Slicer will not
operate.
1.1 Electrical service down.
1.2 Knife guard knob not tight.
1.3 Circuit breaker tripped.
1.4 Bad switch.
1.5 Motor capacitor defective.
1.6 Burned out motor.
1.1 Check electrical service.
Replace fuse or reset circuit
breaker as necessary.
1.2 Tighten knob.
1.3 Reset circuit breaker.
1.4 Replace switch.
1.5 Replace capacitor.
1.6 Replace motor.
2. Motor running
blade not turning.
2.1 Broken belt.
2.1 Replace belt.
3. Excessive noise.
3.1 Blade contacting knife
guard.
3.2 Deflector contacting blade.
3.1 Check for loose knife guard
knob. Shim tapered bushing.
3.2 Adjust deflector.
4. Not cutting
properly.
4.1 Dull blade or improperly
sharpened blade.
4.2 Soft cheese.
4.3 Knife dirty with hard
dried-on product.
4.1 Sharpen blade following
outlined procedures.
4.2 Chill for best slicing results.
4.3 Clean knife thoroughly.
Page 14
