FITTING THE LED ON THE MAGNIFICATION SYSTEM
The lighting device EOS can be conveniently mounted on any model of magnifying system Univet thanks to
the magnetic coupling provided. UNIVERSAL
CLIP Open the clip and apply it on the frame at the nasal bridge; the terminals of the clip must adhere to
both surfaces of the lenses. FLIP-UP UNIVET Use the support provided with the model by screwing the
same using the special screws to seal on the center pin placed between the monocles. EVO Use the support
provided with the model by following the installation instructions given in the leaflet of the magnifying
system.
BLUETOOTH REMOTE CONTROLLER
Each remote controller shall be paired with a single control unit and connected to it before the use.
PAIRING FUNCTION
The pairing function shall be performed only when a new control unit or Bluetooth remote controller is used.
Devices are already paired by Univet prior to shipment.
